Mining at home: noise, heat and electricity

You can run an ASIC at home, but you should honestly assess three things: noise, heat and the mains supply.

Noise

Most air-cooled ASICs are very noisy — roughly as loud as a vacuum cleaner, and they run round the clock. This can be a nuisance if they’re near a living area. A separate room, a soundproof enclosure or water-cooled models can help reduce the noise.

Heat

Almost all the energy consumed is converted into heat. A 3 kW ASIC generates as much heat as a powerful heater. In winter, this can be used for heating, but in summer you’ll need a good extractor fan, otherwise the device will overheat and reduce its hash rate.

Electricity

Modern ASICs consume 3–5 kW or more. Before connecting, check:

• that the cable cross-section and socket are rated for this load;
• a dedicated circuit breaker;
• that your mains supply has sufficient capacity.

Safety

Do not connect ASICs via extension leads or splitters; keep an eye on dust and temperature. For multiple devices, consider hosting them in a data centre: these already have power supply, cooling and monitoring in place.

SuperAsic can help with selection, configuration and deployment — please get in touch.